Five spoke light alloy rim with cush drive damper (1100).

Five spoke light alloy forged rim with cush drive damper (1100S).

Four-stroke 90° L twin-cylinder 1100 cc engine with desmodromic system, electronic injection and air cooling.

1078 cu. cm

61.2 kW (83.2 HP) at 7500 rpm

Max. power at crankshaft as measured on test bench

70 kW (95 HP) at 7750 rpm

Max. torque at crankshaft as measured on test bench

8700 rpm

Desmodromic (type) with two valves per cylinder, operated by four rockers (2 opening rockers and 2 closing rockers) and one overhead camshaft. It is operated by the crankshaft through spur gears, belt rollers and toothed belts.

Ducati anniversary red
Clear coating
Red frame and black wheel rims

F_473.101 (PPG)
228.880 (PPG)

Constant mesh spur gears, controlled by gear change lever on vehicle left side

Exhaust 10.78 mm

With catalytic converter and lambda sensor

ø98 mm

ø98 mm

97.965 mm / 0 - 0.01 mm

97.975 mm / 0 - 0.01 mm

97.985 mm / 0 - 0.01 mm

Piston outer diameter measured at 6.0 mm from piston skirt

ø45 mm

0.015 - 0.024 mm

ø19 mm

ø19 mm / 0 - 0.004 mm

ø19 mm / 0.020 - 0.015 mm

0.035 - 0.049 mm

ø42.014 mm / 0 - 0.016 mm

10 bar (min), difference between the cylinders: 2 bar (max)

0.05 – 0.20 mm

0.10 - 0.40 mm

Fork – gear clearance

0.070 - 0.285 mm

Air: heat is discharged through the large fins of both cylinder-head assemblies

Marzocchi hydraulic upside-down fork, featuring adjustable spring preload, compression and rebound damping, fork legs Ø 50 mm

Standard damping force setting. Undo adjusters from the fully closed position (turn counter clockwise).

Compression: 1.5 turns ± 1/4 of a turn

Rebound: 1.5 turns ± 1/4 of a turn

10 mm (3 turns from the fully open position)

Marzocchi hydraulic upside-down fork, featuring adjustable spring preload, compression and rebound damping, fork legs Ø 50 with TIN treatment

Standard damping force setting. Undo adjusters from the fully closed position (turn counter clockwise).

Compression: 1.5 turns ± 1/4 of a turn

Rebound: 1.5 turns ± 1/4 of a turn

10 mm (3 turns from the fully open position)

Sachs, progressive, with adjustable rebound, compression and spring preload

Standard damping force setting. Undo adjusters from the fully closed position (turn clockwise).

Compression: 2 turns ± 1/4 of a turn

Rebound: 15 clicks ± 3 clicks

Öhlins, progressive, with adjustable rebound, compression and spring preload

Standard damping force setting. Undo adjusters from the fully closed position (turn clockwise).

Compression: 7 clicks;

Rebound: 15 clicks.

84 sq. cm

Electronic type with inductive discharge system

0.6 - 0.7 mm

H7 12 V - 60 W

H9 12 V - 65 W

Key on, solenoid starter, lambda sensor and stop