Canister Filter

10 -	Canister Filter

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15	Canister plate

16	Rubber block

17

18

19

20

21

22

23

24

25	Breather valve

Bold reference numbers in this section identify parts shown in this exploded view diagram. These parts do not appear in the figures near the text.

Canister Filter System (for USA versions only)

USA versions are fitted with an additional system featuring a Canister filter to prevent fuel vapour release into the atmosphere.

The hose (6) is connected to the Canister filter (3); after being filtered, the drained fuel is recycled through the hose (5) and sent to intake manifolds through hoses (8) and (9). Hoses (7) and (24) have their outlets to the ground.

Refer to the figures below for correct hose positions.

Removing the Canister filter


Operations	Reference - See Section
Remove the left fairing	E 2, Removing the side fairings

Loosen clamps (21) securing the Canister Filter (3) connection hoses to horizontal and vertical cylinder manifolds and breather valve (25).

Disconnect hoses (8) and (9) between the Canister Filter (3) and cylinders, and hose (24) connecting canister to the breather valve (25).

Undo nuts (19) and remove canister filter (3) from plate (14).

Refitting the Canister Filter

Reassembly is a reversal of the removal procedure.


Operations	Reference - See Section
Refit the left fairing	E 2, Refitting the side fairings

Routing of hoses, clamps and Canister filter position