Seat - side body panels

3 -	Seat - side body panels

1

2	Right side body panel

3	Left side body panel

4	Right heat shield

5	Left heat shield

6

7

8	Rubber block

9

10

11

12

13

14

15

16	Rubber pad

Parts catalogue


1100	SEAT - rear light
1100S	SEAT - rear light

Bold reference numbers in this section identify parts shown in this exploded view diagram. These parts do not appear in the figures near the text.

Removing the seat

Loosen screw (10) and remove the seat (1); slightly lift it from the back and pull at the back to slide it out.

Refitting the seat

Insert the seat front end (1) into tank recess, start the screw (10) with washer (11).

Tighten the screw (10) to the specified torque (Sect. C 3, Frame torque settings).

Removing the rear side body panels

Remove the passenger seat as described under "Removing the seat".

Unscrew the screws (7) securing the side panels (2) and (3) to silencer and collect the washers (6).

Unscrew the screws (14) securing the side panels (2) and (3) to subframe and collect the washers (15).

Refitting the rear side body panels

Install by following the removal procedure in the reverse order.

Tighten the screws (7) and (14) to the specified torque (Sect. C 3, Frame torque settings).