Bold reference numbers in this section identify parts shown in this exploded view diagram. These parts do not appear in the figures near the text.

Remove the fork leg guards (1) and (2) by unscrewing the screws (3) and collect the washers (4).

Loosen the screws (6) securing the mudguard to fork; keep the washers (7).

Unscrew supports (8) with washers (9) and remove them from fork leg.

Do not ride with the front mudguard removed. The front mudguard supports the brake hose and prevents it from contacting the wheel under braking.

Tighten supports (8) to fork legs, ensure you fit washers (9) in-between.

Position the mudguard (5) onto supports (8), start screws (6) with washers (7) and then tighten to the specified torque (Sect. C3, Frame torque settings).

Refit fork leg guards (1) and (2), start screws (3) with washers (4) and then tighten to the specified torque (Sect. C3, Frame torque settings).