Technical specifications

1.1 -


	Reference	Technical specifications
Vehicle dimensions	Total length	2100 mm
	Total width	794 mm
	Total height	1058 mm
	Wheelbase	1440 mm
	Handlebar height - from grip to the ground	980 mm.
	Seat height	770 mm
	Front footpeg height	360 mm
	Rear footpeg height	490 mm
	Min. ground clearance	120 mm
	Dry weight in running order with no fuel	168 kg
	Weight in running order	Not over 390 Kg
Frame	Type	Chromium-molybdenum steel tube trellis frame
	Steering head angle	24°
	Steering angle	27°
	Steering angle	27°
	Trail	96 mm
	Front rim	Light alloy, three spokes
	Front rim size	MT 3.50x17"
	Front tyre size	120/60 - ZR 17
	Rear rim	Light alloy, three spokes with cush drive damper pads
	Rear rim size	MT 4.50x17"
	Rear tyre size	160/60 - ZR 17
	Type of tyre	Radial tubeless tyre
	Front brake	Hydraulic with 2 calipers
	Front brake	Hydraulic with 2 calipers
	Rear brake	Hydraulic with 1 caliper
Engine	Type	Twin-cylinder 4-stroke Otto-cycle engine
	Bore	88 mm
	Bore	88 mm
	Stroke	57.2 mm
	Stroke	57.2 mm
	Displacement	695 cu. cm
	Displacement	695 cu. cm
	Compression ratio	10.5 ± 0.5:1
	Compression ratio	10.5 ± 0.5:1
	Max. power at crankshaft (95/1/EC) derated	52 kW (70 HP) at 8500 rpm 22 kW at 8250 rpm
	Max. power at crankshaft (95/1/EC) derated	52 kW (70 HP) at 8500 rpm 22 kW at 8250 rpm
	Max. power at crankshaft, measured on test bench	53.7 kW (73 HP) at 8500 rpm
	Max. power at crankshaft, measured on test bench	53.7 kW (73 HP) at 8500 rpm
	Max. crankshaft torque derated	61 Nm (6.2 kgm) at 6750 rpm 46 kW at 3000 rpm
	Max. crankshaft torque derated	61 Nm (6.2 kgm) at 6750 rpm 46 kW at 3000 rpm
	Max. torque at crankshaft, measured on test bench	61 Kw (6.2 Kgm) at 6750 rpm
	Max. torque at crankshaft, measured on test bench	61 Kw (6.2 Kgm) at 6750 rpm
	Max. engine speed	9200 rpm
	Max. engine speed	9200 rpm
	Timing system	Toothed belt, overhead camshaft, 2 valves per cylinder, 4 rocker arms
	Lubrication system	Forced lubrication by pump
	Oil pump	Gear pump with by-pass valves
	Cooling system	Air cooling
	Air filter	One filtering element in the airbox
	Crankshaft type	Enbloc
	Cylinders	"L" at 90°

Colors


	Description	Code
	Ducati anniversary red, red frame and black wheel rims	F_473.101 (PPG)
	Shining black, black frame and wheel rims	248.514 (PPG)
	Matte black, black frame and wheel rims	291.501 (PPG)

Transmission assembly


	Reference	Technical specifications
	Clutch	Multi-plate wet clutch
	Clutch control	Hydraulic
	Gearbox	Six gears

	Primary drive	33/61
	Transmission ratio	1.85
	Final drive	15/48

	Gearbox type	Constant mesh spur gears, controlled by gear change lever on vehicle left side
	Gear ratios 1st 2nd 3rd 4th 5th 6th	13/32 18/30 21/28 23/26 22/22 26/24

Timing/valves


	Reference	Standard value	Max. allowed value
Timing diagram	With 1 mm valve clearance
	Intake	Opening 19° B.T.D.C. Closing 60° A.B.D.C.

	Exhaust	Opening 56° B.B.D.C. Closing 24° A.T.D.C.

	Intake valve diameter	43 mm
	Exhaust valve diameter	38 mm
Valve lift	With 0 mm valve clearance	Intake 10.80 mm Exhaust 10.30 mm

	Opening rocker arm - intake	0.10-0.15 mm	0.05-0.15 mm
	Opening rocker arm - exhaust	0.10-0.15 mm	0.05-0.15 mm
	Closing rocker arm - intake	0-0.05 mm	0-0.20 mm
	Closing rocker arm - exhaust	0-0.05 mm	0-0.20 mm
Adjusting timing belt tension	DDS Minimum value	145 Hz (horizontal) 160 Hz (vertical) 70 Hz	145 Hz (horizontal) 160 Hz (vertical) 70 Hz


Idle speed adjustment		1200 ± 50 rpm

Cylinder / piston


	Reference	Standard value	Service limit
Cylinder	Max. oval		0.03 mm.
	Max. taper with smaller diameter up		0.03 mm.

	Diameter class A class B class C	88.000 mm 88.010 mm 88.020 mm	0- 0.010 mm 0-0.010 mm 0-0.010 mm



Piston	Diameter class A class B class C	87.970 mm 87.980 mm 87.990 mm	± 0.005 mm ± 0.005 mm ± 0.005 mm



Gudgeon pin-piston clearance		0.004 - 0.012 mm	0.025 mm
Piston-cylinder coupling clearance		0.025-0.045 mm	0.12 mm
Gudgeon pin-connecting rod clearance		0.006-0.028 mm	0.005 mm
Con-rod bearings-crankpin coupling diameter clearance		0.015-0.058 mm
Cylinder compression	Standard Minimum Max. allowed difference	9 - 11 bar	8 bar (min.) 2 bar (max.)

Gearbox


	Reference	Standard value	Service limit
Gearbox shafts	Axial play		0.05 – 0.20 mm
Gearbox drum	Axial play		0.10 - 0.40 mm
Gear selector fork	Fork sliding shoe thickness	3.90-4.00 mm
	Fork – gear clearance	0.070- 0.285 mm	0.4 mm

Cooling system


	Reference	Technical specifications
Type	Air: heat is discharged through the large fins of both cylinder-head assemblies

Front wheel


	Reference	Standard value	Service limit
Tread min. thickness	In the most worn position		2 mm
Tyre pressure	Cold	2.1 bar - 2.3 bar
Wheel shaft eccentricity	On 100 mm	0.2 mm
Wheel rim eccentricity	Radial	0.8 mm	2 mm
	Axial	0.5 mm	2 mm

Front suspension


	Reference	Technical specifications
Type		Upside-down hydraulic fork ø 43 non adjustable
	Travel along leg axis	130 mm
Clevis pin	Non adjustable
	Oil quantity per leg	0.400 cu dm

Rear wheel


	Reference	Standard value	Service limit
Tread min. thickness	In the most worn position		2 mm
Tyre pressure	Cold	2.2 bar - 2.4 bar
Swingarm shaft eccentricity	On 100 mm		0.2 mm
Wheel rim eccentricity	Radial	0.8 mm	2 mm
	Axial	0.5 mm	2 mm
Chain	Make Type	D.I.D. 520 V L 4
	Dimensions	5/8" x 1/4"
	No. of links	106

Rear suspension


	Reference	Technical specifications
Type		Progressive monoshock featuring adjustable rebound and spring preload
Shock absorber	Stroke	65 mm
	Standard damping force setting. Turn out the adjusters from fully closed position (clockwise)	8 clicks


	Spring standard length	157 mm
	Wheel travel	148 mm

Hydraulic brakes


	Reference	Standard value	Service limit
FRONT
Brake disc	Type	Drilled twin disc
	Thickness	4 ± 0.1 mm	3.6 mm (min.)
	Flange material	Steel
	Braking ring material	Steel
	Diameter	300 mm
	Braking surface	44 cm2 per disc
Brake caliper	Make	Brembo
	Type	PF 2x28 - 2 pistons
	Caliper cylinder diameter	30 mm - 34 mm
	Pads friction material	FERIT I/D 450-FF
Brake master cylinder	Type	PS 15
	Master cylinder diameter	15 mm
REAR
Brake disc	Type	Drilled disc
	Thickness	4 ± 0.1 mm	3.6 mm (min.)
	Material	Steel
	Diameter	245 mm
	Braking surface	25 sq cm
Brake caliper	Make	Brembo
	Type	P 32 F - 2 pistons
	Caliper cylinder diameter	32 mm
	Pads friction material	FERIT I/D 450 FF
Brake master cylinder	Type	PS11
	Master cylinder diameter	11 mm

Charging system / generator


	Reference	Technical specifications
Battery	Voltage	12V
	Charge	16 Ah
	Type	Sealed, maintenance free
Generator	Capacity	12V - 520 W

Ignition system


	Reference	Technical specifications
Ignition	Type	Electronic type with inductive discharge system
Starting	Type	Electric starter motor 12V - 520 W
Spark plugs	Make and type	Champion RA 4 HC - NGK DCPR8E
	Electrode gap	0.6 ÷ 0.7 mm

Fuel system


	Make	Type
	Unleaded fuel	95 - 98 RON
	THROTTLE BODY	Ø 45 mm
	Injectors per cylinder	1
	Firing points per injector	1

Injection system


	Make	Type
Control unit	Marelli	CPU 5AM2

Lights / instrument panel


	Reference	Technical specifications
Bulbs	Front headlamp (low beam / high beam)	12V - 55/60W
	Number plate light	12V - 5W
	Parking / stop light	12V - 5/21W
	Turn indicator light	12V - 10W
	Instrument panel light	12V - 2W
	Turn indicator warning light	12V - 1.2W
	High beam warning light	12V - 1.2W
	Neutral light	12V - 1.2W
	Oil pressure warning light	12V - 1.2W
	Injection system warning light	12V - 1.2W
Fuses	Regulator	30 A
	Instrument panel	5A
	Injection	20A
	Key sense	10 A
	Ecu	5A
	Loads	15 A
	High and low beam, parking lights	15 A
	Spare	20A
	Spare	5A